Firmamız Armatür Derneği Üyesidir.

Burner Connection Flex
(TS 13890)

Product features

Hose: 316L SS
Fittings: 304 SS
Covering Material: PVC Shirink
Weld Type: Tig

Explanation

Technical Table

Explanation

Burner Connection Flex

Burner Connection Flex is the flex group, which is wrapped in a 316L SS hose with a PVC Shirink coating and is used at the connection point of tig welding type and gas burners. These fittings are used to transfer a wide range of liquids, including gaseous liquids such as air, vapors and gases, and liquids such as water, oils and chemicals. Due to its material, it is resistant to temperature and pressure, but it is recommended to keep it away from flammable and explosive substances. Such substances may damage the protective PVC coatings and seals. Its flexible construction makes it easy to install, but it is recommended to install it with 2 unions. To prevent torsion, the union must be tightened with the second switch when holding the hose inner part with one of the wrenches. This prevents damage to the flexible metal hose. It is long-lasting against corrosive environments and can be replaced by piping, thanks to its easy bending and bending and easy cutting to the desired dimensions. While saving on materials and labor, they can be used easily in areas where vibration is present thanks to their flexible structure, and in areas where hard fluids are present thanks to their stainless structure. Manufactured by 73Pepe using stainless steel, copper reception and nickel-coated carbon steel in accordance with product TS 13890.

Fields of Usage

Gas Burners

Product Specifications

Hose:316L SS Fittings:304SS Material: PVC Shirink Type of Source: Tig

Technical Specifications

Flexible metal hose sets are manufactured by our company in sizes DN 16, DN 20, DN 25, DN 32, DN 40 and DN 50. Therefore, refer to the table for the radii of the 73Pepe flexible metal hoses and DN.

CODE	PRODUCT	NUMBER IN A BOX
FB117-P	1″ Burner Flexi Max. 17cm (N+N)	10
FB119-P	1 1/4″ Burner Flexi Max. 19cm (N+N)	10
FB121-P	1 1/2″ Burner Flexi Max. 21cm (N+N)	10
FB123-P	2″ Burner Flexi Max. 23cm (N+N)	10

Technical Table

73 PEPE LTD. ŞTİ. TS 13890 KULLANIM TALİMATI

Montaj mutlaka yetkili teknisyen tarafından yapılmalıdır.
Montaj esnasında burulma olmaması için rakor sıkılırken iki adet anahtar kullanılmalıdır. Burulmayı önlemek için anahtarın biriyle hortum iç parça tutulurken ikinci anahtarla rakor sıkılmalıdır. Böylelikle esnek metal hortumun zarar görmesi engellenmiş olunur.
Esnek metal hortumun yanıcı ve parlayıcı malzemelerden uzak durmasına özen gösteriniz. Bu tür malzemeler ürünün üzerindeki koruyucu pvc kaplama ve sızdırmazlık elemanına zarar verebilir.
Esnek metal hortum takımlarının firmamız tarafından DN 16, DN 20, DN 25, DN 32, DN 40 ve DN 50 ölçülerinde imalatı yapılmaktadır.

Flexible Hortum Bükme Yarıçapları ve Teknik Tablosu

DN	Bükme Yarıçağı
16	58 mm
20	70 mm
25	85 mm
32	105 mm
40	130 mm
50	160 mm

TS 13890 UYGUN İMAL EDİLMİŞTİR.

Montaj Kuralları

1996’dan Günümüze
Firmamız esnek metal hortum imalatına 1996 yılı başlarında İstanbul / Karaköy’ de başlamıştır.

KURUMSAL

YARARLI BAĞLANTILAR

BİZE ULAŞIN

+90 212 883 43 63

PAZARTESİ - CUMA
08:30 - 18:30

[email protected]

ADRESİMİZ:
Yıldırım Beyazıd Cad. No: 2 Mimarsinan/B.çekmece/İstanbul

Burner Connection Flex (TS 13890)